Aluminum Hose Adapter Joiner – 25mm (0.98") ID, 76mm Length – Silver

1 / 6

Description

If you're plumbing a custom cooling system, an oil cooler, or a water/methanol injection setup, this aluminum hose adapter is a handy little connector.
It's a straight joiner that splices two hoses together – 25mm inside diameter (that's 0.
98 inches), and the overall length is 76mm (about 3 inches).
Silver finish, machined aluminum.

Autobahn88 Aluminum Alloy Hose Joiner Pipe, OD=0.98 (25mm

Brand is unbranded/generic – it's a simple turned aluminum part, nothing fancy.

It's a universal fitment, so as long as your hose ID matches 25mm, this will work.
Use it with rubber or silicone hoses and appropriate clamps (not included).

Dyiom Zinc and Aluminum Male and Female Hose End Water Hose Repair Connector (4-Set) B088MG27H3 - The Home Depot

The barbed ends grip the hose to prevent blow-off under pressure.

Why use this instead of a plastic or steel one?
Aluminum is lightweight, doesn't rust, and transfers heat decently if you're using it in a cooling circuit.

25mm MDPE Coupler Connector for Water Pipe

It's also easy to cut or modify if needed, though you probably won't need to – it's a straight connector.

UPC is 843401104003 if you need it.
It's brand new, individual piece – not a set.

2 Pcs Aluminum Adapter Tube Joiner Pipe Coupler Connector 57mm 2.25 L=76mm

Comes in silver color, plain finish.
Great for custom fabrication projects, radiator hose repairs, or any place where you need to join two hoses of the same diameter.

Aluminum Hose Adapter Tube Joiner Pipe Coupler Connector 25mm 0.98 L=76mm | Australia

Install is straightforward – slide your hose over each end, clamp it down with worm-gear or t-bolt clamps, and you're done.
Check for leaks after pressurizing.

Tee Tube Pipe Connector 1Piece 25mm Detachable Easy

Cheap part, but super useful when you're building something custom and you need to extend or splice a hose line.

Polished Aluminum Alloy Hose Pipe Joiner OD 25mm 1inch L=76mm with